when a buddy calls and says there's something in the scrap bin you should come get, you make the 1300mile round trip ASAP! literally free from the scrap bin, complete from ECU to turbo, ready to run. 2021 and 2022 B6.7 industrial Cummins, one with about 200h and one with about 400h. both perfectly good, removed from an equipment development program and were being scrapped cuz they were a "prototype" configuration.
for "destruction" a hole was drilled into the crank case ... the size for a 1/4npt tap, in a basically non structural area. i just need to run the tap, locktite in a plug, and pull the pan to clean out the shavings. power, ground, fuel, jump the starter and they'll run on the pallets.
but hank happily made the trip, only mishap was about 1000miles down the speedo stopped working. need to investigate that. i'm also going to weigh this **** tonight as i unload, i bet it's closer to 3000lbs in the bed and the springs only squatted 2-1/4"
