Jeepin.com Forums  

Go Back   Jeepin.com Forums > General > Swap Meet
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-17-2019, 10:29 PM   #1
Kurt
TJ Pimp
 
Join Date: Aug 2002
Posts: 5,504
Default 1997 Jeep Wrangler TJ Sport - Rock Crawler

1997 Jeep Wrangler Sport. 72,xxx miles on Jeep before build was done. 90,xxx miles on the Hemi. Gauge cluster from 2002 TJ reads 102,xxx miles.

$35,000

Specs:

Exterior Blue, Interior Grey
Half Doors
Factory Soft Top
Mesh Bikini Top

DRIVETRAIN
5.7L Hemi (90,xxx miles) ($3,000)
HotWire Auto custom wiring harness (Emissions legal) ($1,800)
545-rfe Automatic Transmission
MSD Coil Packs
Atlas 4.3:1 2 Speed Transfer Case ($3,200)
Advance Adapters Atlas TJ Shifters
2” to 2.5” single exhaust with Magnaflow spun cat and Race muffler, 02 Sensors kept
Griffin Radiator with 2 10” SPAL fans
Remote Oil Filter Kit
1-Ton Dodge Master Cylinder
TMR Customs Atlas Support Ring
Adams Driveshafts 1350 Front Driveshaft
Adams Driveshafts 1350 Front Driveshaft
RCI Fuel Cell raise into tub, sheet metal firewall closes it in, locking fuel door access
Derale Transmission Cooler

FRONT AXLE
Ford Dana 60 Front
Artec full axle truss
Artec high steer arms
PSC Full Hydraulic Steering
Yukon Chomoly Inner and Outer shafts
Yukon U-Joints
Yukon 35 Spline Hubs
Detroit Locker
5.38 Yukon Gears
1 Ton Disc Brakes with Chevy Calipers
RuffStuff Specialties Diff Cover

REAR AXLE
Tera60 Rear Center Section
Artec truss
Ballistic Fabrication diff cover
Re-tubed to Chevy 14 bolt width by Bent Metal Customs
Ballistic Fabrication 14 Bolt Spindles
14-Bolt Full Float Hubs
Dutchman Custom Shafts, (35 spline D60, 14-bolt flange)
Disc Brakes with Chevy Calipers
5.38 Yukon Gears
ARB Air Locker

FRONT SUSPENSION
Fox 2.0 14” Coilovers with DSC reservoirs
FOA Hydro Bump Stops
Custom 4-Link with Artec Brackets
2.0” x .25 Wall Control Arms
Currie Johnny Joints on all Control Arms

REAR SUSPENSION
Fox 2.0 14” Coilovers with DSC reservoirs
FOA Hydro Bump Stops
Custom 4-Link with Artec and K.O.R.E Brackets
2.0” x .25 Wall Control Arms
Currie Johnny Joints on all Control Arms

INTERIOR
Full 6 Point 1.75” DOM cage
-Through the dash
-Tied into the frame at A, B, and C-pillar
-Goed through firewall and ties into front coilover mounts
-Seats attach to cage
-Rear child bucket seats on removable cage cradle
Mastercraft Suspension Seats
Mastercraft 3” 5 Point Harnesses
Removable steering wheel
Cobra 75wXT CB
Switches for ARB locker, Compressor, Lights
CNC Cutting Brakes – Custom Stainless Braided brake lines though entire brake
System.
Autometer Transmission Temperature gauge
Heated Seats

LIGHTING:
50” CSI Single Row light bar with Poison Spyder Mount
Pair of Rigid Industries Radiance Pods on A-pillar – blue backlight
10” CSI Single Row light bar on front bumper, amber cover
6.5” SAE Flood LED’s for Headlights
Rigid Industries Chase light on back as taillight, 3rd brake light, license plate light
4” Flush Mount Taillights

TIRES/WHEELS:
(5) 42 x 14.5 17 Super Swamper IROK Bias
(5) TrailReady Hardrock 17x10 Beadlocks

ARMOR:
Custom Made Rear Bumper
Custom Made Front Bumper
Barnes4WD ¼” Belly Pan Skid Plate
Custom 3/16 Fuel Cell Skid Plate
Custom Made Hi-Line Tube Fenders
Genright Rear Full Corners with custom tube fenders
Custom Made Rock Sliders with 1.5” DOM tube

EXTRAS:
Front Frame cut and raised
Rear Frame has been back-halved
Warn Zeon 8S Winch
Factor55 1.0 Fairlead
Factor55 ProLink
CJ Fold Down Tailgate
1.75” DOM Tube Tire Carrier
Poison Spyder Hood Louvers
Optima Blue Top Battery
Hella Horns
Kurt is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.