'55 Chevy 3800 Cummins

6DoF · 08-09-2021, 10:31 AM

so i've just been chugging along with the welding, trying to be patient about welding a little and moving around the letting things cool. weld one side of the fish plate, do another side on another plate, etc. also took me a bit to find the pattern/settings that made the prettier welds on these. never did find something i really liked on the fish plate holes. BUT, aint nothing going nowhere! i still need to take a grinder to the top edge of all the plates and soften that before i snag/cut hoses or wires on em.

08-09-2021, 10:31 AM	#11
6DoF AKA: jeepnski Join Date: Sep 2002 Location: Pittsburgh, PA Posts: 16,857	so i've just been chugging along with the welding, trying to be patient about welding a little and moving around the letting things cool. weld one side of the fish plate, do another side on another plate, etc. also took me a bit to find the pattern/settings that made the prettier welds on these. never did find something i really liked on the fish plate holes. BUT, aint nothing going nowhere! i still need to take a grinder to the top edge of all the plates and soften that before i snag/cut hoses or wires on em. __________________ ...................................___ .................. ________\|\|___\____ ..;.;;.:;:;.,;..;\|/_(O)\______ /_(O)\|