|
11-22-2024, 08:05 AM
|
#34 |
|
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,901
|
man, i keep forgetting to take before pics ... so the pan used to have this tube welded on where the rearward port now is. actually slightly fwd of, but i now have better access to the pan bolts. while the pan was on the bench getting prepped for sound deadener, no time like now to set it up for anything possible in the future. 10an fittings and 2 in case it's ever needed. for now one will just get capped.
sprayed down two double coats of LizardSkin sound control on the tappet cover, valve covers and oil pan. these seam to be the best areas to protect. when i did the oil pan on the 55 i noticed a big difference from the first max coat to the 2nd, so went right for that this time. if you put it on any thicker to start it won't cure right and will pull/crack, have to give it 24h between heavy coats. everything got rattle-can'd black after to seal it up nice. you'd never know the pan had been beat as bad as it was  
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
|
|
|
|
Threaded Mode