I went wheeling - Page 8

Hoofmann · 10-21-2020, 06:01 PM

Quote:

Originally Posted by Cobound

BFG, they don't last for shyt...muds need rotation at 2-3k miles, I'll never own another set.

That’s funny you say that.

Right now, I’m split between the 40” Nitto Trail Grappler MT and the 39” BFG KM3 MT.

I had the old school BFG MTs when this Jeep was on 32s and I liked them. Granted, the tread pattern is drastically different now (they looked closer to the current Nitto MT), but I really like the look of them and most people would agree that BFG is top notch.

Cons: according to the 4WP website, they measure 38.5 inches and they’re ~$25 more per tire compared to Nittos

The Nittos, which I’ve been running for 3 years now have been great. They lasted longer than I expected with a spool (I had low expectations) and they seemed to hook up pretty good on the rocks, despite not having beadlocks on my Jeep.

Cons: They’re not BFGs. I tore a hole in one of my sidewalls.

I’ll probably end up with Nittos.

nblehm · 10-22-2020, 07:50 AM

I have also really liked my trail grapplers. Worn well, hook up pretty well. I was wheeling a few weeks ago with a dude that just got the km3, they seemed pretty soft. Looked like they hooked up well. I have been eye balling the maxxis razr for my next tire.

dan2869 · 10-22-2020, 07:58 AM

What happened to off topic. I haven't been on here forever. Was always entertaining back in the day

Blue XJ · 10-22-2020, 09:57 AM

Quote:

Originally Posted by Cobound

BFG, they don't last for shyt...muds need rotation at 2-3k miles, I'll never own another set.

BFG Mud KM2's or whatever the newer (came out 5-7 years ago, first ones to look like their Crawler) ones are, by far the worst tire I have ever ran offroad. ABSOLUTELY sucked in the snow, was getting pulled out every few minutes it seemed. They did ok in the dirt, and were good in mud (obviously) but their overall performance will make me never buy them again.

TruXus MT's so far have really impressed me, never really got stuck with them, and they were beasts in the snow, hard pack or 2 foot deep, plowed right through.

CO2 lasts a good while, my 20lb tank would do my set of 35's about 5 or 6 times going from 8 - 35psi.

Powertank has a chart on their site that shows capacity...

https://powertank.com/pages/tire-air-up-chart

Edit: Can add 20psi to a 40" 22 times on 1 20lb tank.

Cobound · 10-22-2020, 01:53 PM

I almost snagged the Maxxis Razr for my last purchase, heard awesome stuff about them, they came highly recommended by Bob at TNT, but I just coulnd't pull the trigger on 4 when all I really needed were 3 Nittos.

6DoF · 10-23-2020, 09:22 AM

i really liked how the Nitto's worked in the rocks, i'll be buying them again next time.

i have a DeWALT 60v pancake compressor to run my lockers

works for now, eventually i'd like to mount my CO2 tank.

Cobound · 10-23-2020, 12:13 PM

Quote:

Originally Posted by 6DoF

i really liked how the Nitto's worked in the rocks, i'll be buying them again next time.

i have a DeWALT 60v pancake compressor to run my lockers

works for now, eventually i'd like to mount my CO2 tank.

Yeah, I've liked my Nittos, actually a pretty quiet riding tire as well, surprisingly.

Pancake compressor

nblehm · 10-24-2020, 08:33 AM

Quote:

Originally Posted by Cobound

I almost snagged the Maxxis Razr for my last purchase, heard awesome stuff about them, they came highly recommended by Bob at TNT, but I just coulnd't pull the trigger on 4 when all I really needed were 3 Nittos.

Oh yeah I am way to cheap to buy 4 if I already have 1 new good tire. Dont blame you there.

6DoF · 10-26-2020, 08:02 AM

another day at RC ... another day limping back to the trailer with a break caused by years of abuse. and again, another free fix, so that aint bad! happend early afternoon, so still got in a good day of wheelin. i'm loving this new setup!

Cobound · 10-26-2020, 04:27 PM

That's a lotta rawk.

6DoF · 10-27-2020, 08:36 AM

Quote:

Originally Posted by Cobound

That's a lotta rawk.

Rock Creek baby! the one and only!

Dennis · 10-27-2020, 09:58 AM

https://i.imgur.com/TSgCf9U.mp4
Mom?

6DoF · 10-27-2020, 02:37 PM

nblehm · 11-08-2020, 05:27 PM

Hit 2 new to me trail yesterday. Finally getting this thing pretty dialed. Nice not having to work on it before or after the last few trips.

Hoofmann · 11-09-2020, 11:30 AM

I love that truck and I still think you should build it for crawling.

6DoF · 11-09-2020, 12:46 PM

Quote:

Originally Posted by Hoofmann

I love that truck and I still think you should build it for crawling.

i mean, he kinda was right

Hoofmann · 11-09-2020, 01:18 PM

Build it, beat on it, cut it up, repeat. Until soon you’ll be ready to ditch the whole truck and build a svelte buggy with the drivetrain parts.

JK, I don’t support beating a classic truck in the rocks.

nblehm · 11-09-2020, 01:38 PM

Its fun for what it is and will work for now, but I am going to build another crawler (still streetish legal). The truck will be a great camping rig and dd after that. I dont want to smash the body up too much more than I already have.

I am going to build sliders for the rockers though, that will makr me feel way better about getting after it a little more.

Cobound · 11-09-2020, 02:53 PM

Nate

What trails?

nblehm · 11-09-2020, 03:32 PM

Eagle rock and saran wrap. Outside of colorado springs area.

10-22-2020, 01:53 PM	#145
Cobound - The Don - Join Date: Sep 2002 Location: MN Posts: 49,186	I almost snagged the Maxxis Razr for my last purchase, heard awesome stuff about them, they came highly recommended by Bob at TNT, but I just coulnd't pull the trigger on 4 when all I really needed were 3 Nittos. __________________ To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes

10-26-2020, 04:27 PM	#150
Cobound - The Don - Join Date: Sep 2002 Location: MN Posts: 49,186	That's a lotta rawk. __________________ To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes

11-08-2020, 05:27 PM	#154
nblehm Needs moar dagger Join Date: Feb 2004 Posts: 26,785	Hit 2 new to me trail yesterday. Finally getting this thing pretty dialed. Nice not having to work on it before or after the last few trips. Last edited by nblehm; 11-08-2020 at 05:30 PM.

11-09-2020, 02:53 PM	#159
Cobound - The Don - Join Date: Sep 2002 Location: MN Posts: 49,186	Nate What trails? __________________ To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2020, 07:50 AM	#142
nblehm Needs moar dagger Join Date: Feb 2004 Posts: 26,785	I have also really liked my trail grapplers. Worn well, hook up pretty well. I was wheeling a few weeks ago with a dude that just got the km3, they seemed pretty soft. Looked like they hooked up well. I have been eye balling the maxxis razr for my next tire.

10-22-2020, 07:58 AM	#143
dan2869 Senior Member Join Date: Mar 2003 Posts: 1,161	What happened to off topic. I haven't been on here forever. Was always entertaining back in the day

10-23-2020, 09:22 AM	#146
6DoF AKA: jeepnski Join Date: Sep 2002 Location: Pittsburgh, PA Posts: 16,886	i really liked how the Nitto's worked in the rocks, i'll be buying them again next time. i have a DeWALT 60v pancake compressor to run my lockers works for now, eventually i'd like to mount my CO2 tank.

10-26-2020, 08:02 AM	#149
6DoF AKA: jeepnski Join Date: Sep 2002 Location: Pittsburgh, PA Posts: 16,886	another day at RC ... another day limping back to the trailer with a break caused by years of abuse. and again, another free fix, so that aint bad! happend early afternoon, so still got in a good day of wheelin. i'm loving this new setup!

10-27-2020, 09:58 AM	#152
Dennis Semper Fi ! Join Date: Nov 2002 Posts: 38,851	https://i.imgur.com/TSgCf9U.mp4 Mom?

10-27-2020, 02:37 PM	#153
6DoF AKA: jeepnski Join Date: Sep 2002 Location: Pittsburgh, PA Posts: 16,886

11-09-2020, 11:30 AM	#155
Hoofmann AKA: Kebo Join Date: Jun 2005 Posts: 7,854	I love that truck and I still think you should build it for crawling.

11-09-2020, 01:18 PM	#157
Hoofmann AKA: Kebo Join Date: Jun 2005 Posts: 7,854	Build it, beat on it, cut it up, repeat. Until soon you’ll be ready to ditch the whole truck and build a svelte buggy with the drivetrain parts. JK, I don’t support beating a classic truck in the rocks.

11-09-2020, 01:38 PM	#158
nblehm Needs moar dagger Join Date: Feb 2004 Posts: 26,785	Its fun for what it is and will work for now, but I am going to build another crawler (still streetish legal). The truck will be a great camping rig and dd after that. I dont want to smash the body up too much more than I already have. I am going to build sliders for the rockers though, that will makr me feel way better about getting after it a little more.

11-09-2020, 03:32 PM	#160
nblehm Needs moar dagger Join Date: Feb 2004 Posts: 26,785	Eagle rock and saran wrap. Outside of colorado springs area.