Jeepin.com Forums  

Go Back   Jeepin.com Forums > Tech > Jeep Talk
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 06-02-2018, 08:30 PM   #1
Barry
Senior Member
 
Join Date: Mar 2004
Posts: 616
Default Serious Electrical Problem

I have a 99 XJ with about 433,000 miles on it. It has been sitting for a couple of years and the roof leaks. It still starts up and runs very well. The problem is:

1) the turn signals do not work. I have changed the flasher.
2) the door locks do not work, nor the power windows.
3) the horn does not work.
4) the fog lights, rear window defroster and wiper do not work. I have changed the switches.
5) the AC and blower do not work. I have changed the blower relay/rheostat.

All of the fuses are good and I have changed out every relay in main power distribution panel.

What gives? Is there another relay that powers the inside fuse panel?

I am at my wits end.
Thanks in advance
Barry is offline   Reply With Quote
Old 06-04-2018, 11:27 AM   #2
Nefarious
Senior Member
 
Nefarious's Avatar
 
Join Date: Feb 2006
Posts: 2,718
Default

There are different reasons for all of those things to not work individually, but with all of them happening at once on something that has been sitting for that long with water getting it I would look at the wiring itself, you might have had rodents or water corrosion somewhere. It could be really hard to find too.

Best you can do is start testing for power and resistances in different places to try and diagnose. Wiring stuff can be a real pain.
Nefarious is offline   Reply With Quote
Old 06-04-2018, 01:00 PM   #3
Blue XJ
Senior Member
 
Join Date: May 2007
Posts: 3,857
Send a message via AIM to Blue XJ
Default

I would start looking at the ground for the instrument panel. Sounds like nothing in the dash is getting a power. Have you confirmed there is 12 volts at those items, or just replaced the switches/fuses?
Blue XJ is offline   Reply With Quote
Old 06-08-2018, 04:05 PM   #4
myjeepsbigger
~ Jitterbug ~
 
Join Date: Feb 2003
Posts: 9,186
Default

Just a shot in the dark, here, but I had some similar issues on a 2001 XJ and it ended up being the ignition switch. I actually took it apart and found that the area where the little ball-bearing rides was worn enough that it wasn't letting the switch function properly. Cleaned the contacts and replaced that ball bearing with a regular little .177cal "BB", and it worked like new. Or you can go the boring route, and just go buy a new one for $35 and try it.
myjeepsbigger is offline   Reply With Quote
Old 06-08-2018, 04:20 PM   #5
Cobound
- The Don -
 
Cobound's Avatar
 
Join Date: Sep 2002
Location: MN
Posts: 49,171
Default

Damon
__________________
To each his own.

Not all those who wander are lost.

The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes
Cobound is online now   Reply With Quote
Old 06-08-2018, 08:14 PM   #6
Sir Sam
Working Mother
 
Join Date: Mar 2004
Posts: 19,918
Send a message via AIM to Sir Sam
Default

This sounds like a grounding issue. If the dash isn't making good ground to the body this can happen, there are also grounds on the fender up by the ECU that can corrode and cause light issues as well.
Sir Sam is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.