05-28-2024, 07:29 AM | #441 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,601
|
Friday night i got out to the first cruise, had an absolute blast talking to everyone. no one really knew what it make of it! there was a huge parking lot behind where i'm taking the picture, i was "late" and in the overflow. ended up with a few rows of cars in the grass yet that evening.
Goal Achieved! grass shut in the door
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| Last edited by 6DoF; 05-28-2024 at 08:51 AM. |
05-28-2024, 07:29 AM | #442 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,601
|
turbo drain seal fixed, no leak. the stupid o-ring wasn't thick enough for the groove they put in the part. i just cut a new paper gasket from a roll i had, left the oring, and tightened her back up. guess that worked.
catch can had an internal filter that was restrictive, ditched that. i also forgot to put the steel wool de-mister in the can, so added that. then added 2 more breathers off my 2 oil caps in the front of the engine, no more breather oil. just the front main and rear main leaking oil added some firewall insulation, as you could imagine that was getting uncomfortably hot inside with the hot pipe basically touching. the wrap does a lot, but not quite that much. it's just warm now, so huge game on.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
05-28-2024, 07:30 AM | #443 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,601
|
the wife had a dream recently that i had 3D printed mounts for a Bluetooth speaker under the dash. she woke up and ordered me this little Bose unit. no way i wasn't going to then print mounts for it! so far no latch of any kind, just cradles it. the rubber like body seams to keep it from moving at all.
with a mount, seamed like a great place to put and hide my "AFC Live" fuel control. should work just like the production version from Power Driven Diesel, but was like 10x cheaper. one bypass valve, an orifice valve to slow the boost signal to the injection pump, and one pressure regulator to set max boost the pump sees. allows you to set the springs and screws in the pump for max power, then dial it back for no smoke and smoother daily driving. or if lazy, have the screws n springs set wrong, and dial in appropriate fueling. in my case, i need to keep the power in check as i should have enough turbo and fuel capacity to yeet the head gasket before i shift gears.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
05-28-2024, 07:31 AM | #444 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,601
|
finally the wife got bored and decided to see why i kept talking about washing the truck with CLR and a soft scotchbright pad. so far, so good! she wants to go over it again with the CLR, and i need to order some patina sauce ASAP.
a fair bit of brown reduction, not sure if it worked more or less than i was expecting haha. the nicest part is everything getting a TON smoother after the rub down. but now it almost looks weird with less blotch blue.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
05-28-2024, 08:13 AM | #445 |
Senior Member
|
Awesome to see it on the road .
__________________
- James I like diesels |
05-28-2024, 12:26 PM | #446 |
- The Don -
Join Date: Sep 2002
Location: MN
Posts: 48,593
|
More gay by the day - guys sucking yer nipples at every stop and drop
__________________
To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes |
05-29-2024, 09:12 PM | #447 |
Needs moar dagger
|
The comet wash with steel wool works great too.
Coming out rad! |
|
|