just ordered my SYE, got a question...

Mudstuck · 12-07-2004, 10:42 AM

I got the standard length one from JB conversions. When I called, they said they didn't stock 1330 joints, which I need to run a bronco rear sahft.

Wheres the best place to buy a 1330 output yokethat would fit my SYE?

xj_man_646 · 12-07-2004, 10:43 AM

i have no idea man...sorry maybe just do a search on google or something?

Wackodrumr · 12-07-2004, 10:56 AM

DPG Offroad.

ChadYJ92 · 12-07-2004, 01:31 PM

I'm not sure about the yoke, but how much is your Bronco shaft costing, and where are you getting it from?

Mudstuck · 12-07-2004, 04:18 PM

Quote:

Originally posted by ChadYJ92:
I'm not sure about the yoke, but how much is your Bronco shaft costing, and where are you getting it from?

junkyard (Harry's) 19 bux plus tax.

XJ4play · 12-07-2004, 06:04 PM

Are you looking for 1330 joints or yoke? I got my 1330 yoke from JB coversions and the 1330 joint from CATCO.

Mudstuck · 12-07-2004, 07:15 PM

I'm looking for a 1330 yoke (that will fit the standard HD SYE for a 231).

Carroll257 · 12-07-2004, 09:25 PM

I ran into that problem with the explorer driveshaft that I used in my xj. Go to autozone and get one of their house brand (PDQ) ujoints. PN 1-0134. It mates a 1310 pinion yoke to a 1330 driveshaft. One side is wider than the other. Be sure and buy 2 because you probably won't find a replacement just anywhere.

Vetteboy · 12-07-2004, 09:35 PM

Um...

I wrote them an email and asked them about it, they said they'd include a 1330 yoke for an additional $25.

Mudstuck · 12-07-2004, 09:37 PM

hmm, thats strange, when I called, the lady told me they didn't have any, and to check somwhere else.

Vetteboy · 12-07-2004, 09:47 PM

She probably didn't know what you were talking about, it's a standard Dana/Spicer end yoke.

Here's the email exchange I had:

Quote:

I'm assuming the fixed yoke on the NP231J HD SYE kit fits the standard 1310 u-joint size...is there any way to install a 1330 yoke on the new shaft? I'm considering running a Ford Bronco rear driveshaft in my XJ just to upgrade the drivetrain strength a little bit overall, and I'd rather not have to use conversion u-joints if possible.

Thanks! Hope to hear from you.
Chris

john white (jbconv@bellsouth.net) wrote:
We can supply a 1330 cv yoke for an additional $25.00. Thank you.

Mudstuck · 12-07-2004, 09:51 PM

arg, damn, gotta call em again

ChadYJ92 · 12-08-2004, 12:47 AM

Quote:

Originally posted by Mudstuck:
</font><blockquote>quote:</font><hr />Originally posted by ChadYJ92:
I'm not sure about the yoke, but how much is your Bronco shaft costing, and where are you getting it from?

junkyard (Harry's) 19 bux plus tax. </font>[/QUOTE]

Do they ship? Do they pull it themselves? If not, would you be interested in pulling one at some point for a modest fee?

Vetteboy · 12-08-2004, 12:59 AM

Yeah, that's about average for around here, unless you're me.

No they don't pull it, it's called "Harry's U-pull-it". But I'm pretty sure we can arrange one for ya.

ChadYJ92 · 12-08-2004, 01:02 AM

I'm very tempted to work something out. I'll have to price everything else out first and see what my total bill might come to.

Do you know how long the shaft is? I'd probably have to get mine cut (or lengthened) to about 21.5 inches.

Vetteboy · 12-08-2004, 02:33 AM

It's probably about 10 inches longer than that, maybe a little more.

12-07-2004, 10:42 AM	#1
Mudstuck Trail Guide Join Date: Jun 2003 Location: VA beach / Fairfax Posts: 2,097	I got the standard length one from JB conversions. When I called, they said they didn't stock 1330 joints, which I need to run a bronco rear sahft. Wheres the best place to buy a 1330 output yokethat would fit my SYE? __________________ 98XJ, 4wd conversion, swapped 4.0 (formerly 2wd and 2.5)and a bunch of other stuff.

12-07-2004, 10:56 AM	#3
Wackodrumr Trail Guide Join Date: Jan 2004 Location: KY Posts: 2,938	DPG Offroad. __________________ -Mr. Smiles

12-07-2004, 01:31 PM	#4
ChadYJ92 We miss you bro. Join Date: Aug 2002 Location: Overland Park, Krawlansas Posts: 18,321	I'm not sure about the yoke, but how much is your Bronco shaft costing, and where are you getting it from? __________________ Bleh.

12-07-2004, 07:15 PM	#7
Mudstuck Trail Guide Join Date: Jun 2003 Location: VA beach / Fairfax Posts: 2,097	I'm looking for a 1330 yoke (that will fit the standard HD SYE for a 231). __________________ 98XJ, 4wd conversion, swapped 4.0 (formerly 2wd and 2.5)and a bunch of other stuff.

12-07-2004, 09:25 PM	#8
Carroll257 Trail Guide Join Date: Dec 2003 Location: NW Arkansas Posts: 902	I ran into that problem with the explorer driveshaft that I used in my xj. Go to autozone and get one of their house brand (PDQ) ujoints. PN 1-0134. It mates a 1310 pinion yoke to a 1330 driveshaft. One side is wider than the other. Be sure and buy 2 because you probably won't find a replacement just anywhere. __________________ "I like my women hot and my beer ice cold... a real fast car and my whiskey old..."

12-07-2004, 06:04 PM	#6
XJ4play Trail Guide Join Date: Nov 2003 Location: Zimmerman, MN Posts: 426	Are you looking for 1330 joints or yoke? I got my 1330 yoke from JB coversions and the 1330 joint from CATCO.

12-07-2004, 09:35 PM	#9
Vetteboy glamour turquoise Join Date: May 2003 Location: Red Bank, NJ Posts: 16,704	Um... I wrote them an email and asked them about it, they said they'd include a 1330 yoke for an additional $25. __________________ trail rig: '94 XJ, 14FF, D60, Nv4500, D300, NP231 doubler box, 38.5 Creepies, chopped, caged, MJ'd. Wheeling. DD/tow: '05 Dodge 2500 CTD 6-speed. Wheelin '09...time to have fun. Hammers: x Rausch Creek: xxxxxxxx Uhwarrie 4x4cross: x Line Mountain Miler: x Big Dogs: x RCRocs race: x (= dead xj) Wheelin '10...time to go faster.

12-07-2004, 09:37 PM	#10
Mudstuck Trail Guide Join Date: Jun 2003 Location: VA beach / Fairfax Posts: 2,097	hmm, thats strange, when I called, the lady told me they didn't have any, and to check somwhere else. __________________ 98XJ, 4wd conversion, swapped 4.0 (formerly 2wd and 2.5)and a bunch of other stuff.

12-07-2004, 09:51 PM	#12
Mudstuck Trail Guide Join Date: Jun 2003 Location: VA beach / Fairfax Posts: 2,097	arg, damn, gotta call em again __________________ 98XJ, 4wd conversion, swapped 4.0 (formerly 2wd and 2.5)and a bunch of other stuff.

12-08-2004, 12:59 AM	#14
Vetteboy glamour turquoise Join Date: May 2003 Location: Red Bank, NJ Posts: 16,704	Yeah, that's about average for around here, unless you're me. No they don't pull it, it's called "Harry's U-pull-it". But I'm pretty sure we can arrange one for ya. __________________ trail rig: '94 XJ, 14FF, D60, Nv4500, D300, NP231 doubler box, 38.5 Creepies, chopped, caged, MJ'd. Wheeling. DD/tow: '05 Dodge 2500 CTD 6-speed. Wheelin '09...time to have fun. Hammers: x Rausch Creek: xxxxxxxx Uhwarrie 4x4cross: x Line Mountain Miler: x Big Dogs: x RCRocs race: x (= dead xj) Wheelin '10...time to go faster.

12-08-2004, 01:02 AM	#15
ChadYJ92 We miss you bro. Join Date: Aug 2002 Location: Overland Park, Krawlansas Posts: 18,321	I'm very tempted to work something out. I'll have to price everything else out first and see what my total bill might come to. Do you know how long the shaft is? I'd probably have to get mine cut (or lengthened) to about 21.5 inches. __________________ Bleh.

12-08-2004, 02:33 AM	#16
Vetteboy glamour turquoise Join Date: May 2003 Location: Red Bank, NJ Posts: 16,704	It's probably about 10 inches longer than that, maybe a little more. __________________ trail rig: '94 XJ, 14FF, D60, Nv4500, D300, NP231 doubler box, 38.5 Creepies, chopped, caged, MJ'd. Wheeling. DD/tow: '05 Dodge 2500 CTD 6-speed. Wheelin '09...time to have fun. Hammers: x Rausch Creek: xxxxxxxx Uhwarrie 4x4cross: x Line Mountain Miler: x Big Dogs: x RCRocs race: x (= dead xj) Wheelin '10...time to go faster.