Jk axles in my wagoneer

[nblehm]

So Ive been tossing around this idea. Getting some take out jk axles and suspension and swapping them into my wagoneer project. Figure I can use all the control arms and coils etc from a stock jk. Just would need to make frame brackets. I'm going to need to rebuild the current axles anyway and build steering. I'm also going to have to redo all the perches because they are shady and I'll need all new leafs anyway for a lift.

Pros: disc
brakes all around/bigger brakes
Drag link goes to knuckle
3.73 gears (set I'm looking at)
Coil suspension/ride quality

Cons: :dunno:

[FUBAR]

Cons: :dunno:

They aren't 60s

[Jeepin Jason]

I hope you're looking at a set of JK Rubicon axles?

You should already have a relatively beefy D44 front axle right? A Waggy 44 front swap is a common upgrade for XJs and TJs, and if you're looking at a JK D30 front I think it'd be a step backwards.

And a JK front axle wouldn't have manual hubs (yeah, there are swap kits but they're $$$).

[Kurt]

Agree with Jason....if you've already got the front waggy 44 stick with that. The waggy 44 would be stronger than a stock JK 44.....unless you sleeve it and gusset the C's. And even doing that you still dont have the manual hubs and larger bolt pattern

Take your stock front 44 and get an Artec bracket kit for it and do it that way if you want coils and a 4/5 link.

[nblehm]

This is a street machine maybe a camping trip here and there. Not really worried about strength. I won't be wheeling it.

I was just looking at the dana 30 and dana 44. Can get them with 3.73s and I think an lsd. So I don't have to regear, the only thing I'd be losing is the hubs. Which I think I'd trade for bigger brakes better steering and rear discs.
The current axles are in who knows what condition, 2.72 gears. The thought is I'd actually be ahead money wise swapping to a jk axle and suspension by the time I rebuild both axles and all the suspension anyway. Maybe I'm wrong :dunno:

Jk axles are also a little wider right?

[nblehm]

So jk axles are around 65" looks like.

What's a set of rubicon axles worth you think. Found a guy selling some but wants me to make an offer :rolleyes:

[xj_man_646]

I assumed JK axles would be narrower than the Wagoneer stuff...I know that was the case with my XJ :dunno:

[xj_man_646]

You can also do crossover steering with a Chevy knuckle and steering arm assuming your currently running the 6x5.5 setup.

[FUBAR]

Are rear disks hard to do with the bolt pattern? I've done 5 on 5.5 and 8 on 6.5 but never a 6 on 5.5.

[nblehm]

I was going to go with a rodeo rear axle. Can get 4.10s and disc brakes. And then just weld new perches on. That's about the easiest way to get rear discs.

Now I'm just kicking around this idea. Stock Waggy width axles are 59.5-61" ish. Wagoneer have like 3" of baclspacing on the wheels from the factory.

Edit* I found a set of jk axles on Craigslist for 500 bucks with 6k miles. By the time I rebuild my current axles, buy a hi steer knuckle and rear disc brakes I'm way over 500 bucks in parts. That's what brought on this idea. The suspension is a moot point because either way all the frame brackets need to come off and be redone and I need all new leafs etc

[6DoF]

the JK axles are far from an upgrade in strength, but street only shouldn't be an issue ... i would suspect the $500 axles are 3.07's though.

[nblehm]

They are 3.73. I was planning on 4.10s but 373s are fine. There are plenty of dana 30 jks running around with 35s on them. I know they have housing issues but the wagoneer probably doesn't weight anymore than a jk and will have 32" tires. The strength isn't really that mu cheaper of a concern for me.

Maybe I'm making it too simple. Who knows I might have to cut everything off the axles. At that point it's not worth it.

[Cobound]

When I was looking at building our last JK, the first thing I was told to do was ditch the axles :lol:

Of course, I wanted to wheel it. Honestly, if you're willing to put in all that work and get them set up, a cheap set will do nicely for your purposes and will then later be ready to upgrade to a built set of them, should you want to go that route to wheel more. I've seen plenty of JKs on the trail on 35s and they do just fine...to each his own.

B

[nblehm]

When I was looking at building our last JK, the first thing I was told to do was ditch the axles :lol:



:dunno:

Sometimes I think the internet gets a hold of something and takes it too far. (no, that doesn't happen).

Plenty of people have been out wheeling their dana 30's with no problems. But if you are on a jk forum you need dynatrac 60's for the speed bumps at the mall.

[Cobound]

:dunno:

Sometimes I think the internet gets a hold of something and takes it too far. (no, that doesn't happen).

Plenty of people have been out wheeling their dana 30's with no problems. But if you are on a jk forum you need dynatrac 60's for the speed bumps at the mall.

No, I mean BUILD it...like I was looking at a Hemi, 37/40 rubber, something to take a long haul and abuse it and not be so worried about breaking - and I'm talking about guys that build them - like TNT Customs, etc. I don't belong to a JK forum, and I don't follow that crap. However, 37s and 40s on D30s - first thing you do is ditch the stock axles :lol:

Now, if you would've quoted my entire comment, I agreed w/ you doing a light build, keeping the axles you have or want and being fine. There are plenty of folks wheeling stock axles just fine...don't think you'd be any different.

Start locking, hitting some hard shyt, you'll be upgrading.

When I was looking at building our last JK, the first thing I was told to do was ditch the axles

Of course, I wanted to wheel it. Honestly, if you're willing to put in all that work and get them set up, a cheap set will do nicely for your purposes and will then later be ready to upgrade to a built set of them, should you want to go that route to wheel more. I've seen plenty of JKs on the trail on 35s and they do just fine...to each his own.

[FUBAR]

You can't get gearing and rear disks for $500 even if you buy parts and do it yourself.

[Cobound]

Trooph.

[JEEPJERK]

all axles are the same

[6DoF]

:dunno:

Sometimes I think the internet gets a hold of something and takes it too far. (no, that doesn't happen).

Plenty of people have been out wheeling their dana 30's with no problems. But if you are on a jk forum you need dynatrac 60's for the speed bumps at the mall.

the JK D30 is weaker than a TJ D30 unless you truss it. i know ppl who have bent that axle on large pot holes. my JK came with the axle broken in half after a light roll.

[nblehm]

No, I mean BUILD it...like I was looking at a Hemi, 37/40 rubber, something to take a long haul and abuse it and not be so worried about breaking - and I'm talking about guys that build them - like TNT Customs, etc. I don't belong to a JK forum, and I don't follow that crap. However, 37s and 40s on D30s - first thing you do is ditch the stock axles :lol:

Now, if you would've quoted my entire comment, I agreed w/ you doing a light build, keeping the axles you have or want and being fine. There are plenty of folks wheeling stock axles just fine...don't think you'd be any different.

Start locking, hitting some hard shyt, you'll be upgrading.

I wasn't talking about your build I know you were looking big. Just your standard jk build on 35s.



So what are the tubes thin or something? I remember now my buddy that tows broke a jk d30 in half pulling it from the axle. Could have beem because it was wrecked too :lol:

[Cobound]

Yeah, we're on the same page...hell, once I full circle clipped my D30 on my XJ I never had a problem again w/ the shafts on 35s...and the XJ diff was plenty strong. Even rolled it a few times!

I have heard the JKs are weaker.

My buddy runs 37s on his D44s w/ a 6.4L Hemi, alloys, and they've held up. The shafts have twisted, but the tubes have been fine. But he's not jumping it either :lol:

[nblehm]

Well I'm going to pick up a set tonight. D30/44 3.73s and a trac loc in the back. I guess we will see how they fit.

[6DoF]

just please before install do a gusset kit ... some companies like to sleeve the JK axles inside, some do trusses outside, they ALL sell knuckle gussets. just get the stuff from your favorite shop and game on.

also, huge second on the full circle clips ... or weld the caps. but you knew this.

[nblehm]

Dudes I am NOT going to be wheeling this thing. It's a pavement pounder with maybe a little camping duty.

[6DoF]

this ...

i know ppl who have bent that axle on large pot holes.

"a little camping duty" is very relative to real wheelers. you won't notice it til you've trashed a $$ set of tires and blamed everything else first. the rest i agree with, it'll be fine.

[MBood82]

Dudes I am NOT going to be wheeling this thing. It's a pavement pounder with maybe a little camping duty.

https://scontent.fapa1-1.fna.fbcdn.net/v/t1.0-9/21765241_10105752250999939_6491152102122828092_n.j pg?oh=df0d01c51b628167c101b3e1a91be0b6&oe=5A42236C

[FUBAR]

:p

[nblehm]

https://scontent.fapa1-1.fna.fbcdn.net/v/t1.0-9/21765241_10105752250999939_6491152102122828092_n.j pg?oh=df0d01c51b628167c101b3e1a91be0b6&oe=5A42236C

See I have that junk to wheel. :f2:

[MBood82]

See I have that junk to wheel. :f2:

You have too many vehicles. I thought we were talking about the "other" full size jeep you have...

[nblehm]

https://scontent.fapa1-1.fna.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/22042223_10159316099750632_8690396920967524625_o.j pg?efg=eyJpIjoidCJ9&oh=8c8abbe1ef3fbb8336545a71f3bc7e73&oe=5A87447B